In Situ Observation of Chemically Induced Protein Denaturation at Solvated Interfaces.

Proteins unfold in chaotropic salt solutions, a process that is difficult to observe at the single protein level. The work presented here demonstrates that a liquid-based atomic force microscope and graphene liquid-cell-based scanning transmission electron microscope make it possible to observe chemically induced protein unfolding. To illustrate this capability, ferritin proteins were deposited on a graphene surface, and the concentration-dependent urea- or guanidinium-induced changes of morphology were monitored for holo-ferritin with its ferrihydrite core as well as apo-ferritin without this core. Depending on the chaotropic agent the liquid-based imaging setup captured an unexpected transformation of natively folded holo-ferritin proteins into rings after urea treatment but not after guanidinium treatment. Urea treatment of apo-ferritin did not result in nanorings, confirming that nanorings are a specific signature of denaturation of holo-ferritins after exposture to sufficiently high urea concentrations. Mapping the in situ images with molecular dynamics simulations of ferritin subunits in urea solutions suggests that electrostatic destabilization triggers denaturation of ferritin as urea makes direct contact with the protein and also disrupts the water H-bonding network in the ferritin solvation shell. Our findings deepen the understanding of protein denaturation studied using label-free techniques operating at the solid-liquid interface.

Label-Free Digital Holotomography Reveals Ibuprofen-Induced Morphological Changes to Red Blood Cells.

Understanding the dose-dependent effect of over-the-counter drugs on red blood cells (RBCs) is crucial for hematology and digital pathology. Yet, it is challenging to continuously record the real-time, drug-induced shape changes of RBCs in a label-free manner. Here, we demonstrate digital holotomography (DHTM)-enabled real-time, label-free concentration-dependent and time-dependent monitoring of ibuprofen on RBCs from a healthy donor. The RBCs are segmented based on three-dimensional (3D) and four-dimensional (4D) refractive index tomograms, and their morphological and chemical parameters are retrieved with their shapes classified using machine learning. We directly observed the formation and motion of spicules on the RBC membrane when aqueous solutions of ibuprofen were drop-cast on wet blood, creating rough-membraned echinocyte forms. At low concentrations of 0.25-0.50 mM, the ibuprofen-induced morphological change was transient, but at high concentrations (1-3 mM) the spiculated RBC remained over a period of up to 1.5 h. Molecular simulations confirmed that aggregates of ibuprofen molecules at high concentrations significantly disrupted the RBC membrane structural integrity and lipid order but produced negligible effect at low ibuprofen concentrations. Control experiments on the effect of urea, hydrogen peroxide, and aqueous solutions on RBCs showed zero spicule formation. Our work clarifies the dose-dependent chemical effects on RBCs using label-free microscopes that can be deployed for the rapid detection of overdosage of over-the-counter and prescribed drugs.

Protein fibril length in cerebrospinal fluid is increased in Alzheimer's disease.

Alzheimer's disease (AD) associated proteins exist in cerebrospinal fluid (CSF). This paper evidences that protein aggregate morphology distinctly differs in CSF of patients with AD dementia (ADD), mild cognitive impairment due to AD (MCI AD), with subjective cognitive decline without amyloid pathology (SCD) and with non-AD MCI using liquid-based atomic force microscopy (AFM). Spherical-shaped particles and nodular-shaped protofibrils were present in the CSF of SCD patients, whereas CSF of ADD patients abundantly contained elongated mature fibrils. Quantitative analysis of AFM topographs confirms fibril length is higher in CSF of ADD than in MCI AD and lowest in SCD and non-AD dementia patients. CSF fibril length is inversely correlated with CSF amyloid beta (Aß) 42/40 ratio and CSF p-tau protein levels (obtained from biochemical assays) to predict amyloid and tau pathology with an accuracy of 94% and 82%, respectively, thus identifying ultralong protein fibrils in CSF as a possible signature of AD pathology.

Site-Specific C-Terminal Fluorescent Labeling of Tau Protein.

Formation of Tau protein aggregates in neurons is a pathological hallmark of several neurodegenerative diseases, including Alzheimer's disease. Fluorescently labeled Tau protein is therefore useful to study the aggregation of these pathological proteins and to identify potential therapeutic targets. Conventionally, cysteine residues are used for labeling Tau proteins; however, the full-length Tau isoform contains two cysteine residues in the microtubule-binding region, which are implicated in Tau aggregation by forming intermolecular disulfide bonds. To prevent the fluorescent label from disturbing the microtubule binding region, we developed a strategy to fluorescently label Tau at its C-terminus while leaving cysteine residues unperturbed. We took advantage of a Sortase A-mediated transpeptidation approach to bind a short peptide (GGGH6-Alexa647) with a His-tag and a covalently attached Alexa 647 fluorophore to the C-terminus of Tau. This reaction relies on the presence of a Sortase recognition motif (LPXTG), which we attached to the C-terminus of recombinantly expressed Tau. We demonstrate that C-terminal modification of Tau protein results in no significant differences between the native and C-terminally labeled Tau monomer with regard to aggregation kinetics, secondary structure, and fibril morphology.

Single-Particle Resolution of Copper-Associated Annular α-Synuclein Oligomers Reveals Potential Therapeutic Targets of Neurodegeneration.

Metal ions stabilize protein-protein interactions and can modulate protein aggregation. Here, using liquid-based atomic force microscopy and molecular dynamics simulations, we study the concentration-dependent effect of Cu2+ ions on the aggregation pathway of α-synuclein (α-Syn) proteins, which play a key role in the pathology of Parkinson's disease. The full spectrum of α-Syn aggregates in the presence and absence of Cu2+ ions from monomers to mature fibrils was resolved and quantified at the gold-water interface. Raman spectroscopy confirmed the atomic force microscopy (AFM) findings on the heterogeneity in aggregated states of α-Syn. The formation of annular oligomers was exclusively detected upon incubating α-Syn with Cu2+ ions. Our findings emphasize the importance of targeting annular α-Syn protein oligomers for therapeutic intervention and their potential role as biomarkers for early detection and monitoring progression of neurodegeneration.

Spatial organization of protein aggregates on red blood cells as physical biomarkers of Alzheimer's disease pathology.

Quantifying physical differences of protein aggregates implicated in Alzheimer's disease (AD), in blood, could provide crucial information on disease stages. Here, red blood cells (RBCs) from 50 patients with neurocognitive complaints and 16 healthy individuals were profiled using an atomic force microscope (AFM). AFM measurements revealed patient age­ and stage of neurocognitive disorder­dependent differences in size, shape, morphology, assembly, and prevalence of protein aggregates on RBCs, referred to as physical biomarkers. Crystals composed of fibrils were exclusively detected on RBCs for AD patients aged above 80 years. Fibril prevalence was negatively correlated with the cerebrospinal fluid (CSF) ß-amyloid (Aß) 42/40 ratio and was observed to be higher in the Aß-positive patient category. Using a cutoff of ≥40% fibril prevalence, the CSF Aß status was classified with 88% accuracy (sensitivity 100%, specificity 73%). The merits and challenges in integrating physical biomarkers in AD diagnosis are discussed.

Complete aggregation pathway of amyloid ß (1-40) and (1-42) resolved on an atomically clean interface.

To visualize amyloid ß (Aß) aggregates requires an uncontaminated and artifact-free interface. This paper demonstrates the interface between graphene and pure water (verified to be atomically clean using tunneling microscopy) as an ideal platform for resolving size, shape, and morphology (measured by atomic force microscopy) of Aß-40 and Aß-42 peptide assemblies from 0.5 to 150 hours at a 5-hour time interval with single-particle resolution. After confirming faster aggregation of Aß-42 in comparison to Aß-40, a stable set of oligomers with a diameter distribution of ~7 to 9 nm was prevalently observed uniquely for Aß-42 even after fibril appearance. The interaction energies between a distinct class of amyloid aggregates (dodecamers) and graphene was then quantified using molecular dynamics simulations. Last, differences in Aß-40 and Aß-42 networks were resolved, wherein only Aß-42 fibrils were aligned through lateral interactions over micrometer-scale lengths, a property that could be exploited in the design of biofunctional materials.

Formation of Single Nanopores with Diameters of 20-50 nm in Silicon Nitride Membranes Using Laser-Assisted Controlled Breakdown.

Nanopores with diameters from 20 to 50 nm in silicon nitride (SiN x) windows are useful for single-molecule studies of globular macromolecules. While controlled breakdown (CBD) is gaining popularity as a method for fabricating nanopores with reproducible size control and broad accessibility, attempts to fabricate large nanopores with diameters exceeding ∼20 nm via breakdown often result in undesirable formation of multiple nanopores in SiN x membranes. To reduce the probability of producing multiple pores, we combined two strategies: laser-assisted breakdown and controlled pore enlargement by limiting the applied voltage. Based on laser power-dependent increases in nanopore conductance upon illumination and on the absence of an effect of ionic strength on the ratio between the nanopore conductance before and after laser illumination, we suggest that the increased rate of controlled breakdown results from laser-induced heating. Moreover, we demonstrate that conductance values before and after coating the nanopores with a fluid lipid bilayer can indicate fabrication of a single nanopore versus multiple nanopores. Complementary flux measurements of Ca2+ through the nanopore typically confirmed assessments of single or multiple nanopores that we obtained using the coating method. Finally, we show that thermal annealing of CBD pores significantly increased the success rate of coating and reduced the current noise before and after lipid coating. We characterize the geometry of these nanopores by analyzing individual resistive pulses produced by translocations of spherical proteins and demonstrate the usefulness of these nanopores for estimating the approximate molecular shape of IgG proteins.

Publisher Correction: Subcellular Imaging of Liquid Silicone Coated-Intestinal Epithelial Cells.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.

Subcellular Imaging of Liquid Silicone Coated-Intestinal Epithelial Cells.

Surface contamination and the formation of water bridge at the nanoscopic contact between an atomic force microscope tip and cell surface limits the maximum achievable spatial resolution on cells under ambient conditions. Structural information from fixed intestinal epithelial cell membrane is enhanced by fabricating a silicone liquid membrane that prevents ambient contaminants and accumulation of water at the interface between the cell membrane and the tip of an atomic force microscope. The clean and stable experimental platform permits the visualisation of the structure and orientation of microvilli present at the apical cell membrane under standard laboratory conditions together with registering subcellular details within a microvillus. The method developed here can be implemented for preserving and imaging contaminant-free morphology of fixed cells which is central for both fundamental studies in cell biology and in the emerging field of digital pathology.

Polymer-Nanocarbon Topological and Electronic Interface.

The electronic structure of semiconducting carbon nanotubes selected through polymer functionalization is routinely verified by measuring the spectral van Hove singularity signature under ultraclean vacuum conditions. Interpreting the effect of unperturbed polymer adsorption on the nanotube energetic bands in solvent media is experimentally challenging owing to solvent molecular crowding around the hybrid complex. Here, a liquid-based scanning tunneling microscope and spectroscope operating in a noise-free laboratory is used to resolve the polymer-semiconducting carbon-nanotube-underlying graphene heterostructure in the presence of encompassing solvent molecules. The spectroscopic measurements highlight the role of polymer packing and graphene landscape on the electronic shifts induced in the nanotube energy bands. Together with molecular dynamics simulations, our experimental findings emphasize the necessity of recording physicochemical and electronic properties of liquid-phase solubilized hybrid materials in their native state.

On-Chip Chemical Self-Assembly of Semiconducting Single-Walled Carbon Nanotubes (SWNTs): Toward Robust and Scale Invariant SWNTs Transistors.

In this paper, the fabrication of carbon nanotubes field effect transistors by chemical self-assembly of semiconducting single walled carbon nanotubes (s-SWNTs) on prepatterned substrates is demonstrated. Polyfluorenes derivatives have been demonstrated to be effective in selecting s-SWNTs from raw mixtures. In this work the authors functionalized the polymer with side chains containing thiols, to obtain chemical self-assembly of the selected s-SWNTs on substrates with prepatterned gold electrodes. The authors show that the full side functionalization of the conjugated polymer with thiol groups partially disrupts the s-SWNTs selection, with the presence of metallic tubes in the dispersion. However, the authors determine that the selectivity can be recovered either by tuning the number of thiol groups in the polymer, or by modulating the polymer/SWNTs proportions. As demonstrated by optical and electrical measurements, the polymer containing 2.5% of thiol groups gives the best s-SWNT purity. Field-effect transistors with various channel lengths, using networks of SWNTs and individual tubes, are fabricated by direct chemical self-assembly of the SWNTs/thiolated-polyfluorenes on substrates with lithographically defined electrodes. The network devices show superior performance (mobility up to 24 cm2 V-1 s-1 ), while SWNTs devices based on individual tubes show an unprecedented (100%) yield for working devices. Importantly, the SWNTs assembled by mean of the thiol groups are stably anchored to the substrate and are resistant to external perturbation as sonication in organic solvents.

Motion of Fullerenes around Topological Defects on Metals: Implications for the Progress of Molecular Scale Devices.

Research on motion of molecules in the presence of thermal noise is central for progress in two-terminal molecular scale electronic devices. However, it is still unclear what influence imperfections in bottom metal electrode surface can have on molecular motion. Here, we report a two-layer crowding study, detailing the early stages of surface motion of fullerene molecules on Au(111) with nanoscale pores in a n-tetradecane chemical environment. The motion of the fullerenes is directed by crowding of the underlying n-tetradecane molecules around the pore fringes at the liquid-solid interface. We observe in real-space the growth of molecular populations around different pore geometries. Supported by atomic-scale modeling, our findings extend the established picture of molecular crowding by revealing that trapped solvent molecules serve as prime nucleation sites at nanopore fringes.

Heat transport through atomic contacts.

Heat transport and dissipation at the nanoscale severely limit the scaling of high-performance electronic devices and circuits. Metallic atomic junctions serve as model systems to probe electrical and thermal transport down to the atomic level as well as quantum effects that occur in one-dimensional (1D) systems. Whereas charge transport in atomic junctions has been studied intensively in the past two decades, heat transport remains poorly characterized because it requires the combination of a high sensitivity to small heat fluxes and the formation of stable atomic contacts. Here we report heat-transfer measurements through atomic junctions and analyse the thermal conductance of single-atom gold contacts at room temperature. Simultaneous measurements of charge and heat transport reveal the proportionality of electrical and thermal conductance, quantized with the respective conductance quanta. This constitutes a verification of the Wiedemann-Franz law at the atomic scale.

A robust molecular probe for Ångstrom-scale analytics in liquids.

Traditionally, nanomaterial profiling using a single-molecule-terminated scanning probe is performed at the vacuum-solid interface often at a few Kelvin, but is not a notion immediately associated with liquid-solid interface at room temperature. Here, using a scanning tunnelling probe functionalized with a single C60 molecule stabilized in a high-density liquid, we resolve low-dimensional surface defects, atomic interfaces and capture Ångstrom-level bond-length variations in single-layer graphene and MoS2. Atom-by-atom controllable imaging contrast is demonstrated at room temperature and the electronic structure of the C60-metal probe complex within the encompassing liquid molecules is clarified using density functional theory. Our findings demonstrates that operating a robust single-molecular probe is not restricted to ultra-high vacuum and cryogenic settings. Hence the scope of high-precision analytics can be extended towards resolving sub-molecular features of organic elements and gauging ambient compatibility of emerging layered materials with atomic-scale sensitivity under experimentally less stringent conditions.

Fingerprinting Electronic Molecular Complexes in Liquid.

Predicting the electronic framework of an organic molecule under practical conditions is essential if the molecules are to be wired in a realistic circuit. This demands a clear description of the molecular energy levels and dynamics as it adapts to the feedback from its evolving chemical environment and the surface topology. Here, we address this issue by monitoring in real-time the structural stability and intrinsic molecular resonance states of fullerene (C60)-based hybrid molecules in the presence of the solvent. Energetic levels of C60 hybrids are resolved by in situ scanning tunnelling spectroscopy with an energy resolution in the order of 0.1 eV at room-temperature. An ultra-thin organic spacer layer serves to limit contact metal-molecule energy overlap. The measured molecular conductance gap spread is statistically benchmarked against first principles electronic structure calculations and used to quantify the diversity in electronic species within a standard population of molecules. These findings provide important progress towards understanding conduction mechanisms at a single-molecular level and in serving as useful guidelines for rational design of robust nanoscale devices based on functional organic molecules.

Capturing the embryonic stages of self-assembly - design rules for molecular computation.

The drive towards organic computing is gaining momentum. Interestingly, the building blocks for such architectures is based on molecular ensembles extending from nucleic acids to synthetic molecules. Advancement in this direction requires devising precise nanoscopic experiments and model calculations to decipher the mechanisms governing the integration of a large number of molecules over time at room-temperature. Here, we report on ultrahigh-resolution scanning tunnelling microscopic measurements to register the motion of molecules in the absence of external stimulus in liquid medium. We observe the collective behavior of individual molecules within a swarm which constantly iterate their position to attain an energetically favourable site. Our approach provides a consistent pathway to register molecular self-assembly in sequential steps from visualising thermodynamically driven repair of defects up until the formation of a stable two-dimensional configuration. These elemental findings on molecular surface dynamics, self-repair and intermolecular kinetic pathways rationalised by atom-scale simulations can be explored for developing new models in algorithmic self-assembly to realisation of evolvable hardware.

Nanoelectrical analysis of single molecules and atomic-scale materials at the solid/liquid interface.

Evaluating the built-in functionality of nanomaterials under practical conditions is central for their proposed integration as active components in next-generation electronics. Low-dimensional materials from single atoms to molecules have been consistently resolved and manipulated under ultrahigh vacuum at low temperatures. At room temperature, atomic-scale imaging has also been performed by probing materials at the solid/liquid interface. We exploit this electrical interface to develop a robust electronic decoupling platform that provides precise information on molecular energy levels recorded using in situ scanning tunnelling microscopy/spectroscopy with high spatial and energy resolution in a high-density liquid environment. Our experimental findings, supported by ab initio electronic structure calculations and atomic-scale molecular dynamics simulations, reveal direct mapping of single-molecule structure and resonance states at the solid/liquid interface. We further extend this approach to resolve the electronic structure of graphene monolayers at atomic length scales under standard room-temperature operating conditions.

Nanoscale origin of defects at metal/molecule engineered interfaces.

The control and repair of defects at metal/molecule interfaces is central to the realization of molecular electronic circuits with reproducible performance. The fundamental mechanism governing defect (pore) evolution on mica-supported metal surfaces, its propagation in self-assembled molecular layers, and its implications for molecular junction devices are discussed. Pore eradication by replacing mica with halide platforms coupled with elevated substrate temperature during metal deposition yields exceptionally ultraflat metal landscapes. In situ scanning tunneling microscopy further substantiates molecular locking at defect sites and upon defect healing; the emergence of a closely packed 2-D molecular architecture is demonstrated with nanometer-scale spatial resolution in liquids.

Manipulating connectivity and electrical conductivity in metallic nanowire networks.

Connectivity in metallic nanowire networks with resistive junctions is manipulated by applying an electric field to create materials with tunable electrical conductivity. In situ electron microscope and electrical measurements visualize the activation and evolution of connectivity within these networks. Modeling nanowire networks, having a distribution of junction breakdown voltages, reveals universal scaling behavior applicable to all network materials. We demonstrate how local connectivity within these networks can be programmed and discuss material and device applications.